Making A Group Call - Motorola TETRA MTM800 Manual

Making a Group Call

1. Press
this example,
group 1"
If you press
2 Range
Scan On" on page 37).
2. If this is the talkgroup you wish to call, press and hold the
PTT. Wait for the "Talk permit" tone (if configured) and then
speak into the microphone. Release the PTT button to
listen.
3. To call a talkgroup other than the one shown, press a
navigation key to scroll through the talkgroups. Press
select the talkgroup. Press PTT to start the call in the new
talkgroup
4. To select a range other than the one
shown, press
Use the arrow keys to scroll through the
ranges. To cancel range scrolling, press
Back.
Press
Ok
new range)
selected talkgroup in this range.
When you start a call, the members of the selected talkgroup
who have their terminals turned on, will receive the
transmission.
The 'No Group' message is displayed when you are out of the
normal coverage area of your selected talkgroup. If so, select a
new talkgroup that is valid for your working location.
until
Group Mode
Mode
"Range 10"
is the last selected talkgroup.
, you have the option to select
Optns
, or (see "Receiving a Group Call with
3 Scanning
.
and then
Optns
to select the range (or PTT to start the call in the
The call is set up in the new range and last
.
appears on your display. In
is the last selected range and
Range.
"Talk-
,
1 abc
Ok
to
1 abc
2 Range
3 Scanning
Back
Ok
35