Motorola TETRA MTM800 Manual page 237

2. Scroll through the Templates List using the navigation keys
and choose the required template.
3. Press
Optns
• Scroll to
• Select the mail recipient of your choice by scrolling
through the address list (see page 76) or enter the
address directly.
• Press PTT to send the message.
The display will show one of the following delivery
reports:
Message Delivered
successfully sent and received.
Message Failed
• Scroll to
template for your needs.
• Scroll to
template.
Sending and Editing a Predefined Template
Predefined mail templates are templates that are
programmed into your MTM800 by your Service Provider.
You are allowed to perform limited edit operations of the
predefined template and to send it, but you will not be able to
store the edited template or erase it from the Templates List.
1. Scroll to
The first template in the Predefined
Template List is displayed (if no prede-
fined template exist, the message
No Predefined
2. Scroll through the Templates List using the navigation keys
and choose the required template (in the example, a
registration message is displayed).
A predefined message can only be sent from the Edit screen.
and scroll to your selection:
and press
Send
— to indicate that the message was
— the message was not received.
and press
Edit
and press
Erase
and press
3 Predefined
will be displayed).
.
Ok
to edit the message in the
Ok
to erase the current
Ok
.
Ok
Register:
abc 27
Edit
Back
107