Sending A Status Message - Motorola TETRA MTM800 Manual

Your MTM800 will enter the Inbox automatically and the
icon will not blink.

Sending a Status Message

1. Switch to the desired talkgroup, to which you want to send
a status message.
2. Press
Menu
3. In this example,
status. To send a different status, scroll
to your selection in the list of pre-
programmed statuses, or key the status
number. To stop scrolling press
will automatically be displayed on the screen.
From the status sub-menu it is also possible to type a valid 5
digit status number in the user status range.
4. Press PTT or
to send the status message.
If your Service Provider has enabled the Targeted Status
feature you will see an additional SendTo softkey on the
status sending display. Pressing SendTo gives you an
option of sending your status as a private call or as a group
call.
To enter the address for a private call, either key in the
recipients number or scroll through the list of numbers, or
press abc to search the address book. For a group call,
select the talkgroup within the attached range, then press
PTT to send the status message.
The display will show one of the following delivery reports:
Status Sent
Sts Failed
previous display.
100
from any mode, or select
Status
– 1 Messages – 1 Send Sts – Ok
Lunch
or the relevant one-touch numeric key
— the screen exits the status mode.
— the screen returns within a few seconds to the
( 1 1)
Menu
.
is the last sent
. The status message
Cancl
Lunch
6
Back