Motorola TETRA MTM800 Manual page 222

Setting Operating Mode (
To enter the sub-menu,
press
Menu
This sub-menu allows you to select the
mode your MTM800 will be operating on.
To set up your operating mode:
• Select
It is not possible to switch from Direct Mode to Trunk Mode, if
the terminal is in Transmit Inhibit Mode.
To change the Operation Mode quickly you can use one of the
programmable keys (if set up by your Service Provider).
Setting Transmit Inhibit (TXI) Mode (
To enter the sub-menu,
press
Menu
This mode should always be set before
entering areas where transmission is
prohibited, e.g. in hospitals or in potentially explosive areas.
To activate the TXI Mode:
• Select
The terminal will sound the "Transmit Inhibit" tone. The
display blinks between the Talkgroup name and the message
TXI Mode
All menu options which cause transmitting are blocked in TXI
Mode. It is not possible to change the Talkgroup.
To deactivate the TXI Mode, e.g. after you have left the area
where transmission is prohibited:
• Select
The terminal sounds the "Transmit Inhibit" tone and returns
back to Group Mode or Direct Mode, if Direct Mode was the
last selected mode.
92
Menu
– 6 Networks – 2 Oper. Mode
, or
2 DirectMode
– 6 Networks – 3 TXI Mode
, and press
1 Activate
, and the solid orange LED indicates the TXI Mode.
, and press
2 Deactivate
6 2)
.
, and press
1 Trunk Mode
6 3)
Menu
.
.
Ok
.
Ok
1 Trunk Mode
2 DirectMode
Ok
Back
.
Ok
1 Activite
2 Deactivate
Back Ok