Security - Motorola TETRA MTM800 Manual

Security

(
Menu
To enter the Security sub-menu select
3 Security.
Locking/Unlocking the Keypad (
To prevent accidental key presses:
1. From the menu, select
the On/Off key.
When there is an incoming call and the keypad is locked, you
can still use PTT,
2. To unlock the keypad, press
The Emergency Key is not locked. Entering Emergency Mode,
unlocks all keys.
PIN Protect (
Menu
Network access protection is configured by your Service
Provider:
No access to network operation
receive Emergency Calls. Unit lock takes effect at the next
power on.
To protect access to network operation:
1. Press
2. Select
1 On
3. At the
Code?
is "0000"). To avoid disclosure of the PIN, asterisks are
displayed instead of the code digits. Press
will show one of the following messages:
Unit Locked
returns to the Security sub-menu and shows the active
setting:
Unit Unlocked
returns to the Security sub-menu and shows the active
setting:
3)
1 Keylock.
3 2)
– 3 Security – 2 PIN Protect.
Menu
to set the protection (or
prompt enter the 4-digit code (factory setting
— you entered the correct code. The display
1 On
.
— you entered the correct code. The display
2 Off.
3 1)
Menu
All keys are locked except
, and Reject.
3 1.
Menu
— you can only send or
2 Off
7 Covert Mode
1 Keylock
2 PIN Protect
Ok
Back
to cancel it).
Ok.
The display
79