Table of Contents
Advertisement
Procedure
Perform operation according to the instructions on the window. The following shows the main operating
procedure.
BD BOARD screen
Click [SET].
Insert a cartridge.
The result is displayed.
Eject a cartridge. ([LEFT])
Turn off and on the unit, and then
insert the cartridge again.
Check that "Mounting successfully"
is displayed in [Mount Status]
using the Utility software.
Completion screen
BD BOARD
REPLACE POST PROC
EXECUTING...COMPLETED
EXIT: MENU KEY
When the completion screen opens, click [LEFT] and remove the cartridge.
Turn off and on the unit, and then insert the cartridge again.
Run the Utility software, and then check that "Mounting successfully" is displayed in [Mount Status] in
[Disc Information] on the Basic Information screen of the Device Information menu.
128
Advertisement
Table of Contents
