Table of Contents
Advertisement
6-4. CHECK Menu
This menu is used for check and operation monitoring of each device.
6-4-1. DEVICE, TEMPERATURE SENSOR
This menu is used to check the temperature sensor installed in the optical drive.
Menu hierarchy
[CHECK]
→ [DEVICE]
→ [TEMPERATURE SENSOR]
TEMPERATURE SENSOR
CHECK START?
OK:
SET KEY
EXIT: MENU KEY
Procedure
Perform operation according to the instructions on the window.
Temperatures of parts detected by the sensor on the IC721/BD-48 board are displayed.
Display example
TEMPERATURE SENSOR
CHECKING...OK
FPGA :42.3
[DEG]
OP0A :27.1 OP0B :27.3
OP1A :27.2 OP1B :27.4
AGAIN: SET KEY
EXIT: MENU KEY
111
Advertisement
Table of Contents
