Cellink BIO X User Manual page 46

07 Relevant G-code commands
Commands
G1 Xnnn Ynnn Ennn Fnnn
G1 Znnn Ennn Fnnn
G4 Snnn Pnnn
G7 Xnnn Ynnn Ennn Fnnn
G7 Znnn Ennn Fnnn
42
Description
G1 is the absolute move command. The values for the X and Y parameters
are the coordinates (in mm) directing where to move. E tells the BIO X to
open the valve for extrusion. F is the movement speed of the printhead in
mm/min.
G1 is the absolute move command. The value for the Z parameter is the
coordinate (in mm) directing where to move. E tells the BIO X to open the
valve for extrusion. F is the speed of the printhead in mm/min.
The G4 command tells the system to dwell. S is the wait time in seconds
and P is the wait time in milliseconds.
G7 is the relative move command. The values for the X and Y parameters
are the coordinates (in mm) directing where to move relative to the current
position. E tells the BIO X to open the valve for extrusion. F is the speed of
the printhead in mm/min.
G7 is the relative move command. The value for the Z parameter is the
coordinate (in mm) directing where to move relative to the current position.
E tells the BIO X to open the valve for extrusion. F is the speed of the
printhead in mm/min.