Heating The Thermoplastic Printhead - Cellink BIO X User Manual

4.2 Heating the Thermoplastic Printhead

NOTE: The steps under this section will test the temperature functionality of your Thermoplastic Printhead. It is only necessary to follow
these steps once, after receiving your new printhead.
1. Assemble and attach the Thermoplastic Printhead (Section 4.1).
2. Go to the Utilities Menu and then the Tools submenu.
3. Set the printhead temperature (Figure 5).
04 Getting started
Figure 5: Presetting temperature for the
Thermoplastic Printhead.
15