Miele DO 7860 Operating And Installation Instructions page 67

Using residual heat
 The temperature in cooking
programmes using temperatures
above 140 °C which take longer than
30 minutes to cook can be turned
down to the lowest possible
temperature about 5 minutes before
the end of cooking. The residual heat
in the oven is sufficient for cooking
the food. Do not switch the Dialog
oven off (see "Warning and safety
instructions").
 If you have set a duration for a
cooking programme, the oven
heating elements will switch off
automatically shortly before the end
of cooking and
appear in the display. The residual
heat in the oven is sufficient to
complete the cooking programme.
 If you are using the Miele food probe
to cook food, the oven heating
elements will switch off automatically
shortly before the end of cooking.
Energy save phase
display. The residual heat in the oven
is sufficient to complete the cooking
programme.
 If you wish to run the pyrolytic
cleaning programme, it is best to start
it immediately after a cooking
programme. The residual heat in the
oven will help reduce the amount of
energy required.
Energy save phase
appears in the
Settings
 Select
QuickTouch
energy consumption.
Energy saving mode
 The Dialog oven will switch itself off
automatically to save energy if a
programme is not being run and
controls have not been operated. The
time of day will appear in the display
or the display will remain dark (see
"Settings - Time of day").
will
Energy saving tips
| Off to reduce
67