3Com OfficeConnect 3CR414492 Getting Started Manual page 12

1-4 C
HAPTER
Table 1-1 OCR 812 Features
Generic Routing Encapsulation (GRE)
ADSL WAN interface port
Asynchronous Transfer Mode (ATM)
RFC 1483 protocol
LAN interface
Networked workstations
Bridging
Internet Protocol (IP) and Internetwork
Packet Exchange (IPX) protocols
Routing Information Protocol (RIP)
Simple Network Management Protocol
(SNMP)
Address translation
Dynamic Host Configuration Protocol
(DHCP)
Telnet
Packet filtering
OCR 812 Manager
1: G S
ETTING TARTED
A proposed Internet protocol
transported within other tunneling
protocols in a VPN.
Contains one port that connects to the
wide area network (WAN).
A network technology that transmits
video, audio, and computer data packets
in very small sizes over the same
network.
A defined protocol standard that
describes two encapsulation methods,
routed and bridged, for carrying
network traffic over ATM.
A four-port Ethernet 10Base-T hub.
Allow one or more to connect to other
computers on a remote LAN and also
provide high-speed access to the
Internet.
Supports learning bridge and 802.1d
spanning tree functionality to eliminate
loops.
A protocol used to route data from
source to destination.
Specifies how routers exchange routing
table information.
Provides a set of protocols for managing
complex networks.
Using Dynamic NAT, Static NAT,
SuperNAT, and Intelligent PAT.
A protocol for assigning dynamic IP
addresses to devices on a network.
DHCP also provides services for your
LAN, including automatic assignment of
IP addresses to workstations.
Connects your PC to a server on the
network.
Provides an extensive set of data filtering
capabilities.
Contains the Web-based online user's
guide, Tools, Configuration, and
Monitor modes that support your 812
configuration. These modes have online
Help for each configuration function.