System Specifications; Port Attributes - 3Com Router 3030 Installation Manual

System specifications

Table 1 System specifications of Router 3030
Item
Port
Four 10/100M Ethernet port (LAN)
SDRAM
8MB
Power supply (external)
Maximum tollerance 90-264V a.c., 50/60Hz Current:
Voltage: 12V d.c.
300mm (11.81in) X 180mm (7.1in) X
45mm (1.77in) (Maximum dimensions,
which are the highest arc points of the
plastic panel.)
Operating temperature
10 to 90% (noncondensing)
LEDs
There are eight LEDs on the cover. The following table explains their meaning.
Table 2 LEDs of Router 3030
LED
LAN0/LAN1/LAN2/LAN3
ON means that link has been set up.
ADSL ACT
Blinking means that data is being sent
from or received at the interface.
OFF means ADSL is inactive.
Blinking means the interface is being
trained.
Blinking means that the system is
properly working.
PWR
ON means that power is being
supplied.

Port attributes

The Router 3030 provides one console port, four 10/100M Ethernet ports and one
ADSL over POTS port. The following table describes the attributes of ADSL over
POTS port.
3030
Description
1 console port 1 ADSL over POTS (Annex A)
Processor MPC859 50Mhz
64MB Flash Memory
Maximum 12W
power
consumption
Input rated voltage: 100-240V a.c.,
50/60Hz
Output
0.5A~1A
Current:'4A Dimensions (W x H x D)
Weight 1kg
0 to 40*C Operating humidity
Description
OFF means that link is not set up.
Blinking means that data is being sent from or
received at the interface.
OFF means that no data is being sent from or
received at the interface.
ADSL LNK
ON means ADSL is active.
SYS
Always ON or OFF means that the system is
incorrectly working.
OFF means that power is not being supplied.
Router 3030 9