3Com Router 3030 Installation Manual page 36

34 C 5: S
HAPTER OFTWARE
M
AINTENANCE
In this menu, only options 2, 4 and 6 are different, so only they are detailed here.
For other options, refer to Boot menu on the 3000 DSL.
1 Download application program with Ethernet.
This option leads you into NET port download menu, which includes these
options:
Net Port Download Menu:
1: Change Net Parameter
2: Download From Net
3: Exit to Main Menu
Enter your choice(1-3):1
They are described as follows:
Change NET parameter
The following information is prompted for this option:
Change Boot Parameter:
'.' = clear field; '-' = go to previous field; ^D = quit
boot device
processor number
host name
file name
inet on ethernet (e) : 169.254.10.10
inet on backplane (b):
host inet (h)
gateway inet (g)
user (u)
ftp password (pw) (blank = use rsh):
flags (f)
target name (tn)
startup script (s)
other (o)
The information after the colon is just for prompt, so you can enter the parameters
you select directly behind it.
Both TFTP and FTP are available for the 3000 DSL. See Upgrading Application
Program with EthernetUpgrading Application Program with Ethernet for details.
Download from NET.
Select this option to begin downloading after parameters are set properly.
Exit to Main Menu.
2 Clear application password
This option clears super user password. This option functions only one time and
password authentication for super users is restored after the router is rebooted.
3 Enter debugging environment in case of faults.
Boot menu provides two methods for upgrading the program and the Boot ROM
sub-menu operations, which are introduced in the following subsections.
: fei0
: 0
: 8040
: M8240ram.arj
: 169.254.10.11
:
: 8040
: 0x0
:
:
: