Onfiguring The; Setting Up Configuration Environment - 3Com Router 3030 Installation Manual

4
Setting up
Configuration
Environment
Connecting the router to
a console terminal
Setting the parameters
of console terminal
C

ONFIGURING THE

To set up a local configuration environment, simply connect the RJ45 connector of
the console cable to the console port on the router, and DB25 or DB9 connector to
the serial interface of a PC, as shown below.
Figure 1 Local configuration through CON port
RS232 Serial interface RS232 Serial interface
PC PC
Console cable Console cable
1 Start the console terminal and set up a new connection
If the configuration is performed through a PC, the terminal emulation program
(such as Terminal of Windows3.1 and HyperTerminal of Windows95/98/NT) should
be run on the PC for setting up a new connection. As shown below, enter a name
for the new connection and press <OK> button.
R
OUTER
Router 303x
Console port Console port