Table of Contents
Advertisement
7
Exercise ECG Recording
7.5
During the Test
Hold / Pause (treadmill)
Next
Init Recovery / Recovery (depends on
setting)
Search
Heart Rate
Blood Pressure
mmHg x bmp
Lactate
SpO
2
VEBR
Page 76
7.5.1
Test Control Buttons
The test control button on the bottom of the screen are as follows:
Hold current stage. The button changes to Resume and the step counter is stopped
(but total work counter continues) until the stage is resumed. During this time the load
on the bike remains / the treadmill speed continues, until resume is again clicked.
Go to next stage.
Initiates the recovery phase and the button changes to End. The recovery stage is
held for as long as defined in the protocol or until End button is pressed.
Returns to the search and discontinues the current ECG acquisition. You are
prompted to confirm:
Acquisition ongoing
An acquisition is currently ongoing. Do you want to discard
the current recording?
7.5.2
Information and Settings Panel
Averaged over 4 beats.
• The percentage of current heart to target heart
rate is displayed after the heart rate (the formula
used to define the target heart rate is defined in
system settings
ECG, page
133).
• If the target is exceeded, the Heart rate indica-
tion changes from green to red and flashes to in-
dicate that the target is exceeded.
Last entered/recorded blood pressure measurement (systolic/diastolic). The value is
displayed until a new value is entered /measurement taken, or until a new exercise
stage is entered. The previous BP is given beside the current value.
The (last) BP measurement taken in the stage, multiplied by the heart rate.
Select to enter the respective measurement and description.
The SpO
measurement received from a connected device /entered manually.
2
para. 7.5.5, SpO
(see para. 7.5.6, Arrhythmia (option), page
Discard
(see para. 11.14, Exercise
, page 78)
2
79).
CARDIOVIT CS-104
Cancel
82
120
48% of 170
(see
Advertisement
Table of Contents
