BT Total Broadband Home Hub 3 User Manual And Troubleshooting page 18

Default Hub settings
Broadband username (PPP):
Broadband password:
Encapsulation:
Multiplexing:
Wireless network name/SSID:
Wireless key:
The factory settings are printed on your Hub's pull-out. Make a note of any changes here.
Wireless interface:
Authentication:
Encryption type:
Mode:
Hub Admin password:
Your password's printed under your Hub and on its pull-out. Make a note of any changes here.
IMPORTANT: if you or your engineer changed your wireless settings, we suggest
you keep a note of them above.
bthomehub@btbroadband.com
none required
PPPoE
VC based or VC Mux
wi-fi 802.11.b, g or n
WPA-PSK or WPA2-PSK
AES or TKIP
infrastructure
(not ad hoc)
(also known as WPA-Personal)
Useful information
19