Multifunction Lever; Daytime Running Lights (Drls); If Equipped; High/Low Beam Switch - Dodge CHALLENGER 2021 Owner's Manual

46 GETTING TO KNOW YOUR VEHICLE
NOTE:
For vehicles sold in Canada, rotate the head-
light switch clockwise from the parking light and
instrument panel light position to the first
detent to turn the headlight switch to the AUTO
position. Rotate to the second detent to turn on
headlight, parking light, and instrument panel
light operation.
M L
ULTIFUNCTION EVER
The multifunction lever is located on the left
side of the steering column.

Multifunction Lever

D R L
AYTIME UNNING IGHTS
I E
F QUIPPED
The Daytime Running Lights will turn on when
the engine is started and will remain on unless
the headlamps are turned to the on position,
the parking brake is applied, or the ignition is
placed in the OFF position.
NOTE:
For vehicles sold in Canada, the Daytime

Running Lights will automatically deactivate
when the front fog lights are turned on.
If allowed by law in the country in which the

vehicle was purchased, the Daytime Running
Lights can be turned on and off using the
Uconnect system Ú page 133.
On some vehicles, the Daytime Running

Lights may deactivate, or reduce intensity, on
one side of the vehicle (when a turn signal is
activated on that side), or on both sides of
the vehicle (when the hazard warning lights
are activated).
(DRL ) — H /L
S IGH OW
Push the multifunction lever toward the
instrument panel to switch the headlights to
high beams. Pulling the multifunction lever
back will turn the low beams on.
A
UTOMATIC
C — I
ONTROL
The Automatic High Beam Headlamp Control
system provides increased forward lighting at
night by automating high beam control through
the use of a camera mounted on the
windshield. This camera detects vehicle
specific light and automatically switches from
high beams to low beams until the approaching
vehicle is out of view.
NOTE:
The Automatic High Beam Headlamp Control

can be turned on or off using the Uconnect
system Ú page 133.
Broken, muddy, or obstructed headlights and

taillights of vehicles in the field of view will
cause headlights to remain on longer (closer to
the vehicle). Also, dirt, film, and other obstruc-
tions on the windshield or camera lens will
cause the system to function improperly.
B S
EAM WITCH
H B H
IGH EAM EADLAMP
E
F QUIPPED