Exterior Lights; Headlight Switch; Multifunction Lever; Daytime Running Lights (Drls) - If Equipped - Dodge CHALLENGER 2020 Owner's Manual

42 GETTING TO KNOW YOUR VEHICLE

EXTERIOR LIGHTS

H S
EADLIGHT WITCH
The headlight switch is located on the left side
of the instrument panel. This switch controls the
operation of the headlights, parking lights,
instrument panel lights, instrument panel light
dimming, interior lights and fog lights (if
equipped).

Headlight Switch

Rotate the headlight switch clockwise to the
first detent for parking light and instrument
panel light operation. Rotate the headlight
switch to the second detent for headlight,
parking light and instrument panel light
operation. Push the switch to enable fog lights
(if equipped).
M L
ULTIFUNCTION EVER
The multifunction lever controls the operation
of the turn signals, headlight beam selection
and passing lights. The multifunction lever is
located on the left side of the steering column.

Multifunction Lever

D R L
AYTIME UNNING IGHTS
E
QUIPPED
The Daytime Running Lights will turn on when
the engine is started and will remain on unless
the headlamps are turned to the on position,
the parking brake is applied, or the ignition is
placed in the OFF position.
NOTE:
If allowed by law in the country in which the
vehicle was purchased, the Daytime Running
Lights can be turned on and off using the
Uconnect System, refer to "Uconnect Settings"
in "Multimedia" for further information.
H /L
IGH OW
Push the multifunction lever away from you to
switch the headlights to high beam. Pull the
multifunction lever toward you to switch the
headlights back to low beam.
A
UTOMATIC
C
ONTROL
The Automatic High Beam Headlamp Control
system provides increased forward lighting at
night by automating high beam control through
the use of a digital camera mounted on the
windshield. This camera detects vehicle
(DRL ) — I
S F
specific light and automatically switches from
high beams to low beams until the approaching
vehicle is out of view.
NOTE:
The Automatic High Beam Headlamp Control

can be turned on or off using the Uconnect
System. Refer to "Uconnect Settings" in
"Multimedia" for further information.
B S
EAM WITCH
H B H
IGH EAM EADLAMP
— I E
F QUIPPED