Dodge CHALLENGER 2021 Owner's Manual page 136

134 MULTIMEDIA
For the Uconnect 4 With 7-inch Display and the
Uconnect 4/4C/4C NAV With 8.4-inch Display
Press the Apps button, then press the
Settings button on the touchscreen to display
the menu setting screen. In this mode the
Uconnect system allows you to access
programmable features.
NOTE:
All settings should be changed with the igni-

tion in the ON/RUN position.
Only one area of the touchscreen may be

selected at a time.
When making a selection, press one button on
the touchscreen to enter the desired menu.
Once in the desired mode, press and release
the preferred setting option until a check mark
appears next to the setting, showing that setting
has been selected. Once the setting is
complete, either press the Back Arrow button
on the touchscreen to return to the previous
menu, or press the X button on the touchscreen
to close out of the settings screen. Pressing the
Up or Down Arrow button on the right side of the
screen will allow you to toggle up or down
through the available settings.
NOTE:
Availability of settings, setting names, and
menu options can vary depending on vehicle
features, equipped Uconnect system, and the
currently installed software.