Instrument Cluster Descriptions - Dodge CHALLENGER 2021 Owner's Manual

68 GETTING TO KNOW YOUR INSTRUMENT PANEL
I C D
NSTRUMENT LUSTER ESCRIPTIONS
1. Tachometer
Indicates the engine speed in revolutions

per minute (RPM x 1000).
2. Instrument Cluster Display
When the appropriate conditions exist,

this display shows the instrument cluster
display messages Ú page 69.
Instrument Cluster Display
3. Speedometer
Indicates vehicle speed.

4. Temperature Gauge
The temperature gauge shows engine

coolant temperature. Any reading within
the normal range indicates that the
engine cooling system is operating satis-
factorily.
The gauge pointer will likely indicate a

higher temperature when driving in hot
weather, up mountain grades, or when
towing a trailer. It should not be allowed
to exceed the upper limits of the normal
operating range.
WARNING!
A hot engine cooling system is dangerous.
You or others could be badly burned by steam
or boiling coolant. It is recommended to call
an authorized dealer for service if your
vehicle overheats Ú page 292.
CAUTION!
Driving with a hot engine cooling system
could damage your vehicle. If the
temperature gauge reads "H," pull over and
stop the vehicle. Idle the vehicle with the air
conditioner turned off until the pointer drops
back into the normal range. If the pointer
remains on the "H," turn the engine off
immediately and call an authorized dealer for
service.
5. Fuel Gauge
The pointer shows the level of fuel in the

fuel tank when the Keyless Push Button
Ignition is in the ON/RUN position.
The fuel pump symbol points

to the side of the vehicle where
the fuel door is located.
NOTE:
The hard telltales will illuminate for a bulb check
when the ignition is first cycled.