Exterior Lights; Headlight Switch; Multifunction Lever; If Equipped - Dodge CHARGER 2020 Owner's Manual

Hide thumbs Also See for CHARGER 2020:
Table of Contents

Advertisement

EXTERIOR LIGHTS

H
S
EADLIGHT
WITCH
The headlight switch is located on the left side
of the instrument panel. This switch controls the
operation of the headlights, parking lights,
instrument panel lights, instrument panel light
dimming, interior lights and fog lights (if
equipped).

Headlight Switch

1 — Rotate Headlight Control
2 — Push Front Fog Light Control
3 — Instrument Panel Dimmer Control
4 — Ambient Light Dimmer Control
Rotate the headlight switch clockwise to the
first detent for parking light and instrument
panel light operation. Rotate the headlight
switch to the second detent for headlight,
parking light and instrument panel light
operation. Push the switch to enable fog lights

(if equipped).

M
L
ULTIFUNCTION
EVER
The multifunction lever controls the operation
of the turn signals, headlight beam selection
and passing lights. The multifunction lever is
located on the left side of the steering column.

Multifunction Lever

GETTING TO KNOW YOUR VEHICLE
D
R
L
AYTIME
UNNING
IGHTS
I
E
F
QUIPPED
The Daytime Running Lights will turn on when
the engine is started and will remain on unless
the headlamps are turned to the on position,
the parking brake is applied, or the ignition is
placed in the OFF position.
NOTE:
If allowed by law in the country in which the
vehicle was purchased, the Daytime Running
Lights can be turned on and off using the
Uconnect System, refer to "Uconnect
Settings" in "Multimedia" for further informa-
tion.
On some vehicles, the Daytime Running
Lights may deactivate, or reduce intensity, on
one side of the vehicle (when a turn signal is
activated on that side), or on both sides of
the vehicle (when the hazard warning lights
are activated).
45
(DRL
) —
S
2

Advertisement

Table of Contents
loading

Table of Contents