Basic Voice Commands; Get Started; Additional Information - Dodge CHALLENGER 2021 Owner's Manual

If you see the NAV icon on the bottom bar or in
the Apps menus of your 8.4-inch touchscreen,
you have the Uconnect 4C NAV system. If not,
you have a Uconnect 4C with 8.4-inch display
system.
B V C
ASIC OICE OMMANDS
The basic Voice Commands below can be given
at any point while using your Uconnect system.
Push the VR button . After the beep, say:
"Cancel" to stop a current voice session

"Help" to hear a list of suggested Voice

Commands
"Repeat" to listen to the system prompts

again
Notice the visual cues that inform you of your VR
system's status. Cues appear on the
touchscreen.
G S
ET TARTED
The Voice Recognition (VR) button
activate/deactivate your Voice Recognition
system.
Helpful hints for using Voice Recognition:
Reduce background noise. Wind and

passenger conversations are examples of
noise that may impact recognition.
Speak clearly at a normal pace and volume

while facing straight ahead.
Each time you give a Voice Command, you

must first push the Voice Recognition (VR)
button, wait until after the beep, then say
your Voice Command.
You can interrupt the help message or

system prompts by pushing the VR button
and saying a Voice Command from the
current category.
GETTING TO KNOW YOUR VEHICLE
is used to
Uconnect Voice Command Buttons
1 — Push To Start Or Answer A Phone Call And
Send Or Receive A Text
2 — Push The Voice Recognition Button To Begin
Radio, Media, And Climate Functions
A I
DDITIONAL NFORMATION
© 2020 FCA US LLC. All rights reserved. Mopar
and Uconnect are registered trademarks and
Mopar Owner Connect is a trademark of FCA US
LLC. Android™ is a trademark of Google Inc.
SiriusXM® and all related marks and logos are
trademarks of SiriusXM® Radio Inc.
Ú page 348.
29
2