Dodge CHALLENGER 2021 Owner's Manual page 171

Hide thumbs Also See for CHALLENGER 2021:
Table of Contents

Advertisement

NOTE:
For phones which are not made a favorite, the
phone priority is determined by the order in
which it was paired. The most recent phone
paired will have the higher priority.
NOTE:
During the pairing procedure, you may receive a
pop-up on your mobile phone for the Uconnect
system to access your "messages" and
"contacts". Selecting "Ok" or "Allow" will sync
your contacts with the Uconnect system.
You can also use the following VR command to
bring up the Paired Phone screen from any
screen on the radio:
"Show Paired Phones"
NOTE:
Software updates on your phone or the
Uconnect system may interfere with the Blue-
tooth® connection. If this happens, simply
repeat the pairing process. However, first make
sure to delete the device from the list of phones
on your Uconnect system. Next, be sure to
remove Uconnect from the list of devices in your
phone's Bluetooth® settings.
Pair A Bluetooth® Streaming Audio Device
1. Press the Media button on the
touchscreen to begin.
2. Change the source to "Bluetooth®".
3. Press the Bluetooth® button on the
touchscreen to display the Paired Audio
Devices screen.
4. Press the Add Device button on the
touchscreen.
NOTE:
If there is no device currently connected with
the system, a pop-up will appear.
5. Search for available devices on your
Bluetooth®-enabled audio device. When
prompted on the device, confirm the PIN
shown on the Uconnect screen.
MULTIMEDIA
6. Uconnect Phone will display an in-process
screen while the system is connecting.
7. When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite
device. Selecting "Yes" will make this device
the highest priority. This device will take
precedence over other paired devices
within range.
NOTE:
For devices which are not made a favorite, the
device priority is determined by the order in
which it was paired. The most recent device
paired will have the higher priority.
You can also use a following VR command to
bring up a list of paired audio devices:
"Show Paired Phones"
169
5

Advertisement

Table of Contents
loading

Table of Contents