Cone Removal - Case IH AXIAL-FLOW 2577 Operator's Manual

STRAW SPREADERS AND STRAW/CHAFF SPREADERS

Cone Removal

The straw spreaders and straw/chaff spreaders
distribute the straw from the beater evenly over the
gr ou n d. T hi s h el p s t o p r eve nt bun c hi n g a n d
windrowing, making plowing and tillage operations
easier.
For better windrowing when the straw is to be baled,
remove the spreaders (Refer to Baling Straw in this
section of the manual).
NOTE: Always clean the shafts and apply a dry
lubricant (Slip Plate) on the shafts before installing
the cones.
To remove the curved bat straw/chaff spreaders,
depress large button and drop spreader off of
shaft.
To remove the straw/chaff spreaders, depress
large button and drop spreader off of shaft.
WARNING: Avoid
spreader or thrown material. Do not stand
!
behind Combine when the spreader is
turning.
NOTE: DO NOT lubricate couplings. Oil and grease
accumulate dust which causes binding.
6 - FIELD OPERATION
injury from rotating
M191A
CURVED BAT STRAW/CHAFF SPEADER
217
RD01D200