Hazard Warning Lights; Control - Fiat 124 SPIDER 2020 Owner's Manual

HAZARD WARNING LIGHTS

Control

The Hazard Warning Lights should always be
used when you stop on or near a roadway in
an emergency.
The Hazard Warning Light switch is located
on the center instrument panel below the
radio. Push the switch to turn the Hazard
Warning Lights on or off.
NOTE:
The Hazard Warning Lights warn other
drivers that your vehicle is a traffic hazard
and that they must take extreme caution
when near it.
Hazard Warning Light Switch
196
Abarth Hazard Warning Light Switch
When the switch is pushed, the Hazard
Warning Lights are active and all directional
turn signals will flash on and off to warn
oncoming traffic of an emergency. Push the
switch a second time to turn off the Hazard
Warning Lights. The hazard warning indi-
cator lights in the instrument cluster will
flash simultaneously.
NOTE:
The turn signals do not work while the

Hazard Warning Lights are activated.
Check local regulations about the use of

Hazard Warning Lights while the vehicle is
being towed to verify that it is not in viola-
tion of the law.
If the brake pedal is pressed while driving

on slippery roads, the emergency stop
signal system could operate causing all of
the directional turn signals to flash.
While the emergency stop signal system is

operating, all of the directional turn
signals automatically flash rapidly to
caution the driver of a vehicle following
behind of a sudden braking situation.