Table of Contents
Advertisement
Warning Light (Red Color) On Dashboard Trim
Warning Light
Seat Belt Warning Light
The seat belt warning light turns on if the driver or passengers seat is occupied and the seat belt is not fastened with the
ignition placed in the ON position.
If the driver or passengers seat belt is unfastened (only when the passenger seat is occupied) and the vehicle is driven at
a speed faster than about 12 mph (20 km/h), the warning light flashes. After a short time, the LED stops flashing, but
remains illuminated.
If a seat belt remains unfastened, the LED flashes again for a given period of time.
If the driver or passengers seat belt is unfastened after the LED turns on, and the vehicle speed exceeds 12 mph (20 km/h),
the LED flashes again.
With Passenger Occupant Classification System: to allow the passenger occupant classification sensor to function properly,
do not place and sit on an additional seat cushion on the passengers seat. The sensor may not function properly because
the additional seat cushion could cause sensor interference.
Without Passenger Occupant Classification System: placing heavy items on the passengers seat may cause the passengers
seat belt warning function to operate depending on the weight of the item. To allow the passengers seat weight sensor to
function properly, do not place and sit on an additional seat cushion on the passengers seat. The sensor may not function
properly because the additional seat cushion could cause sensor interference. If a small child is seated on the passengers
seat, the warning light may not operate.
Fasten the seat belts.
Warning Light (Amber Color) On Instrument Cluster Trim
Warning Light
Passenger Air Bag Deactivation Indicator Light
The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or when the
engine is started. If the light does not turn on or remains turned on, contact an authorized dealer.
What It Means
What It Means
107
Advertisement
Table of Contents
