Increasing Speed; Decreasing Speed; Resume Speed; Temporarily Canceling The System - Fiat 124 SPIDER 2020 Owner's Manual

Increasing Speed

To increase speed using the Speed Control
buttons:
Push the RES (+) button and hold it, your

vehicle will accelerate. Release the button
at the desired speed.
Push the RES (+) button and release it

immediately, to adjust the set speed.
Multiple pushes of the button will increase
the set speed according to the number of
times it is pushed.
Increasing speed with a single RES (+) button
operation:
If the instrument cluster display for

vehicle speed is indicated in mph: speed
will increase in 1 mph increments.
If the instrument cluster display for

vehicle speed is indicated in km/h: speed
will increase in 1 km/h increments.
To increase speed using accelerator pedal:
Press the accelerator pedal to accelerate

to the desired speed.
Push the SET (-) button and release it

immediately. This new set speed will be
saved.
NOTE:
Accelerate the vehicle to speed up tempo-
rarily with the accelerator pedal when the
Speed Control is on. Increasing the speed
will not interfere with, or change the set
speed. Take your foot off the accelerator to
return to the set speed.

Decreasing Speed

To decrease speed using the Speed Control
buttons:
Push the SET (-) button and hold it, the

vehicle will gradually slow down. Release
the button at the desired speed.
Push the SET (-) button and release it

immediately to adjust the set speed.
Multiple button pushes will decrease the
set speed according to the number of
times it is pushed.
Decreasing speed with a single SET (-) button
operation:
If the instrument cluster display for

vehicle speed is indicated in mph: the
speed will decrease in 1 mph increments.
If the instrument cluster display for

vehicle speed is indicated in km/h: the
speed will decrease in 1 km/h increments.

Resume Speed

If any other method besides the OFF/CAN
button was used to cancel cruising speed
(such as applying the brake pedal or pressing
in the clutch pedal) and the system is still
activated, the most recent set speed will
automatically resume when the RES (+)
button is pushed.
If the vehicle speed is below 16 mph
(25 km/h), increase the vehicle speed up to
25 mph (40 km/h) or more and then push
the RES (+) button.

Temporarily Canceling The System

WARNING!
Leaving the Speed Control system on when
not in use is dangerous. You could
accidentally set the system or cause it to
go faster than you want. You could lose
control and have an accident. Always leave
the system OFF when you are not using it.
173