Table of Contents
Advertisement
24
Relay play
When tapes are set in the decks A and B and the re-
verse mode is set to "
the second deck will be started automatically after
play of the first deck has been completed. Tape play
will be repeated alternately.
÷ Relay play is not possible in the reverse modes "
and " ".
÷ If a tape is loaded only in either deck, playback stops
after having played both sides of the tape.
A tip for the use of the tape counter
The tape counter is set to "0000" when a cassette tape
is loaded. In case you want to interrupt recording
(playback) in the middle of the tape, the counter read-
ing will be helpful as a reference for locating the same
position when continuing the recording (playback)
the next time. The tape counter figure decrements
during recording or playback of the reverse side
(while the 2 tape transport indicator is lit).
To set the tape counter to "0000", open the cassette
holder once. Then the counter will be reset.
" (play of both sides), play of
A
"
Let's have sound
A
Hide quick links:
Advertisement
Table of Contents
