Clock Adjustment - Kenwood XD-753 Instruction Manual

Clock adjustment

16
This unit incorporates a clock function. Be sure to adjust to the correct time before using the timer
function. The time can be displayed only while the power is off.
1
Select "Clock Options".
MENU
2
Select "Adjust Time".
3
Adjust the hour.
To decrease
To increase
the figure
the figure
4
Adjust the minute.
To decrease To increase
the figure the figure
To display the time
(In standby mode)
(Displayed for approx. 5 sec.)
SELECT
SELECT
SELECT
ENTER
The following items can be selected by turning the
MULTI CONTROL jog dial.
"CD Program Play"
"Recording Options"
"Tape Dubbing"
"Audio Options"
"Clock Options"
"Language Options"
+Scrolled display (Clock Options)
The following items can be selected by turning the
MULTI CONTROL jog dial.
"Sleep Timer"
"Adjust Time"
"Timer Play"
"Auto Power Save"
Example: Adjustment to 8:45
(For U.K. and Europe)
0Ô1Ô2...13Ô14...Ô0 ...
÷ The time display starts to blink.
÷ Press the SELECT key. The hour is entered and the
minute display starts to blink.
(For U.K. and Europe)
00Ô01Ô02...59Ô00Ô01...
÷ Press the BACK key to return to the previous step and
restart operation from there.
÷ To adjust correct time, press the ENTER key at the same
moment as a time announcement.
÷ The clock display blinks after the power cord has been
unplugged from the AC power outlet and plugged in
again or after a power failure. In this case, set the time of
the day again.
(Other countries)
AM12ÔAM1ÔAM2...
PM1ÔPM2...ÔAM12 ...
(Other countries)