Connection With Other Components (Optional Or Com- Mercially-Available Equipment) - Kenwood XD-753 Instruction Manual

8
Connection with other components
CAUTION Note on Connection
Connect the components as shown in the diagram. Only plug the power cord into a power outlet once connec-
tions are completed. The rear panel configuration is varies depending on the model (countries or area).
MD recorder, DVD player, VCR or analog turntable
MD recorder
Digital
input
Optical-fiber cable
DIGITAL OUT OPTICAL jack
Remove the cap and plug the optical-fiber cable.
Optical-fiber cable
(Provided with the MD
recorder)
÷ Insert the optical-fiber cable straight into the connector until it clicks.
÷ Be sure to attach the protection cap when the connector is not used.
÷ Never bend or bundle up the optical-fiber cable.
When an external system component is connected, please read the instruction manual of the
Note Note
component as well.
Audio
output
DVD/VIDEO INPUT
DIGITAL OUT
OPTICAL
DIGITAL OUT
OPTICAL
(optional or commercially-available equipment)
DVD player/VCR/analog turn-
table (P-110/optional)
L
Audio output
R
For XD-753/653/XD-553/503
(Europe and U.K. only)
Cap
System connection