Convenient Cd Recording; Selection Of The Recording Type - Kenwood XD-753 Instruction Manual

Convenient CD recording

40

Selection of the recording type

With this unit, the following edit recording is
possible according to the purpose.
If you want to select the track to be recorded while playing a CD
Recording only desired titles
CD ONE TRACK RECORDING
If you want to record a CD in order of track numbers
Recording of an entire CD
CD DIRECT RECORDING
If you want to record only the desired tracks
Recording the programmed titles
CD PROGRAM RECORDING
The recording will be interrupted for the part of the guide tape during both -side recording. To avoid the case like
this, please use single-side recording.
Note Note
Regarding CD-TEXT
When a CD-TEXT disc is played on this unit, it dis-
plays the text information (disc or track title) re-
corded into the CD.
To switch the displayed text information between
the disc title and track title during playback, press
the TEXT DISP. key.
(When pressed during playback)
\
\
\
(Remote control unit only)
RDS DISP.
TEXT DISP.
Note that this cassette deck cannot record onto
Note Note
Metal tapes.
Perform this operation when a track you want to record
starts during CD playback. This starts recording of the
track from the beginning.
Perform the "CD DIRECT RECORDING" operation while
the CD player is in stop mode to start recording.
Program the desired tracks from up to 3 CD discs in the
desired order and record the programmed playback onto
tape.
Scrolls the disc title display.
CD player's time display.
Scrolls the track title display.
q
w
e