Kenwood XD-753 Instruction Manual page 35

To repeat all discs
1
Cancel "PGM".
If the "PGM" indicator is lit, make
sure to turn it off.
2
Select the disc to be played first.
3
Select "All Repeat".
(Remote control unit only)
REPEAT
Press the key repeatedly to switch the
display.
1 "Repeat off" (Repeat canceled)
2 "One Track Repeat"
3 "Disc Repeat"
4
"All Repeat"
+Scrolled display (All Repeat)
To stop repeated playback
Press the REPEAT key repeatedly until the repeat mode is switched off.
÷ The repeat mode can also be canceled by pressing the 0 OPEN/CLOSE key.
Goes off
‹
DISC
SKIP
Lights
To repeat only the programmed tracks
1
Perform the procedure in
"Listening in the desired sequence
(program playback)" till step 3 to
program the desired CD tracks.
Lights
÷ All of the programmed tracks will be played
repeatedly.
2
Start playback.
ENTER
3
Select "PGM Repeat".
(Remote control unit only)
REPEAT
Press the key repeatedly to switch the
display.
1
"PGM Repeat"
2 "Repeat off" (Repeat canceled)
+Scrolled display (PGM Repeat)
35
Playback of CD
¤
Lights