Connection Of Other Components And Accessories; Xd-8550/Xd-6000 (En/T - Kenwood XD-8550/8050 Instruction Manual

8

Connection of other components and accessories

Connect separately sold parts as shown in the figure.
Do not plug the power cord into the power outlet until all
of the required connections have been made.
Video deck
REC
OUT
L
R
Audio cord
Audio input
MD recorder (DM-F70)
(Optional)
Connection of system control cord
Plugging the connector
Insert the plug straight into the con-
nector until it locks
Video cord
Monitor TV
Audio output
Audio cord
MD AUX
PLAY
INPUT
IN
Audio output
Optical fibre cable
System control cord
Unplugging the connector
While pushing the two sides of con-
nector in pull it straight out
For playback or recording from the equipment connected
to the AUX terminals, press the AUX key of the amplifier
input selector key.
For playback from the equipment connected to the MD ter-
minals, prase the MD key of the amplifier input selector keys.
SPEAKERS
R L
( 6 - 16 )
CONNECT WITH C-H5 OR C-H6 OR C-H7
SUPER
WOOFER
PRE OUT
ANTENNA
AM
MD AUX
REC PLAY
INPUT
OUT IN
CONNECT WITH A-H5
GND
L
FM 75
R
OPTICAL
DIGITAL
OUTPUT
CONNECT WITH
C-H5 OR C-H6 OR C-H7
AND
X-H5 OR DM-H5
CONNECT WITH SYSTEM
DP-H5 OR DP-MH5 CONROL
System connection

XD-8550/XD-6000 (En/T)

Digital input terminal
Remove cap
OPTICAL
DIGITAL
Optical fibre
OUTPUT
cable
Remove the protection cap
for use.
(Take care not to lose the
cap)
Note on connection of optical-
fiber cable
Insert the optical-fiber cable straight into
the connector until it clicks.
Be sure to attach the protection cap when
the connector is not used.
Never band or bundle the optical-fiber
cable.
All of the optical-fiber cables sold in audio
stores cannot always be used. If the cable
you purchased cannot be connected to
this unit, please consult your dealer or
KENWOOD distributor.