Kenwood XD-8550/8050 Instruction Manual page 68

6 8
Ensure that the power is OFF.
Check the reservation content.
When timer operation is not required
To set the same timer program again
Select the program number to be
checked.
EX.BASS
Press so that all PROG. indicators are
OFF.
SRS 3D
Press so that the desired PROG. indica-
tors lights.
SRS 3D
Adjust the clock before setting the timer.
The reservation contents cannot be cleared. The contents are
cleared only when they are changed.
Note Note
Each press of the key switches the program numbers as follows.
PROG.1 ........ Display of program 1
PROG.2 ........ Display of program 2
Normal mode
The reserved contents will be displayed for 3 seconds per item. After
this, the previous display content appears again.
To change the reserved contents
Restart the procedure of "Timer programming" from the
beginning.
Each press of the key switches the program numbers as follows.
PROG.1 ........ Program 1 operates.
PROG.2 ........ Program 2 operates.
PROG.1, 2 .... Programs 1 and 2 operate.
Not lit .......... No program operates.
The reservation contents are held in memory.
Each press of the key switches the program numbers as follows.
PROG.1 ........ Program 1 operates.
PROG.2 ........ Program 2 operates.
PROG.1, 2 .... Programs 1 and 2 operate.
Not lit .......... No program operates.
Also prepare the disc or tape and adjust the listening volume.
Timer operation
XD-8550/XD-6000 (En/T)