Xd-8550/Xd-6000 (En/T - Kenwood XD-8550/8050 Instruction Manual

To stop playback
To check the programmed tracks
To add a track to the program
1 Select the disc.
2 Select the track.
Go to step 3 within 8 seconds.
3 Establish the selection.
To select tracks from more than one CD,
repeat steps 1 to 3 for each track.
The added track number is added to the end
of the existing program.
7
Remote control unit only
CHECK
Go to step
2 within 8
seconds.
DISC SKIP
1 2 3
4 5 6
7 8 9
PTY
SEARCH
0 +10
P.MODE
Auto space function (Remote control unit only)
When the SPACE key is pressed during programming of tracks,
a non-recorded space of a few seconds will be created between
tracks. By recording tracks with these spaces on tape, the search
and repeat play operations of tape using the DPSS function
(which works by searching the non-recorded spaces) can be
performed reliably.
Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
To cancel the auto space function, press the P.MODE key or the
SPACE key again.
Track No.
Disc No.
Blinks.
PGM MEMO EDIT RDS EON TA NEWS INFO.
D 2 * ) 3
AUTO DISC ALL
TUNED STEREO
MAX
Each time the key is pressed, the program No. (P-NO) and the disc No.
are displayed.
The previous display resumes in a few seconds.
To clear tracks from the program
Press to clear tracks from the end.
Each time the key is pressed, the last track in
the program is cleared.
The track being played cannot be cleared.
To clear all track.
The entire program contents also are erased
when the disc tray is opened.
For XD-8550
Playback of CD

XD-8550/XD-6000 (En/T)

Program No.
TP PTY TOTAL SPACE PROG. MUTE N.B.
* P - ) : 1
12
5
4
3
kHz 2
1
MHz 10
8 9
6 7
11 12 13 14 15
Remote control
CLEAR
unit only
P.MODE
4 1