Xd-8550/Xd-6000 (En/T - Kenwood XD-8550/8050 Instruction Manual

To wind tape at high speed
To fast wind in direction |
1
Press while in
the stop mode
Press the 7 key to stop fast winding.
Selection of reverse mode.
O p π
R
Each press switches the modes as follows.
1 "[" ... Both sides are played back (recorded), and
then the tape stops (When 2 key is pressed,
only one side is played back (recorded).
2 """ .. Both sides are played back endlessly.
(The tape stops after recording onto both
sides.)
3 """ .. Only one side is played back (recorded),
and then the tape stops.
Normal (TYPE ), high (TYPE
set automatically.
Remove tape slack before loading.
Close the door securely.
2
Transport direction
To fast wind in direction \
¡
Lights
REV.MODE
), or metal (TYPE ) tape selection is
3
Transport direction
To stop playback
Do not take out the cassette tape until the tape transport has
stopped completely.
Selection of DOLBY NR
The Dolby NR system minimizes the hiss noise heard when
playing tape. When playing a tape prerecorded with Dolby
NR ON, be sure to set the DOLBY NR ON for playback.
DOLBY NR
Each press switches the modes as follows.
1 "DOLBY NR indicator" ON
........ DOLBY NR is used.
2 "DOLBY NR indicator" OFF
........ DOLBY NR is not used.
Select the Dolby NR mode according to the recording condition of
the tape.
Dolby noise reduction manufactured under license from Dolby Labo-
ratories Licensing Corporation.
"DOLBY" and the double-D symbol are trademarks of Dolby Labora-
tories Licensing Corporation.
Transport direction indicators
The 2 and 3 indicators indicate the current direction in which
the tape advances when playback or recording is started auto-
matically by the easy operation function, etc. This direction is
the direction stored in memory when the tape was last stopped.
(To switch the tape transport direction, press the play key cor-
responding to the desired direction then press the stop (7) key.)
Let's put out some sound

XD-8550/XD-6000 (En/T)

7
(Noise Reduction)
Lights
REV
2 7