Clock Adjustment - Kenwood NV-500 Instruction Manual

Clock adjustment

14
After plugging the AC cord into a power
outlet, set the time of the day as described
below.
CLOCK
STANDBY/TIMER
CLOCK
/LIGHT
SET
4
–P.CALL–
SET
To display the time
4, ¢
1. Switch power ON.
If a CD or cassette has been loaded in the unit, simply pressing the play
key turns power ON and starts playback automatically.
To stop the playback, press the 7 key.
2. Display the Clock display.
÷ In other areas than the UK, Europe and
Australia, the clock shows the time of
the day in the 12-hour system.
÷ The previous display will reappear if no
operation is performed for about 5
seconds.
3. Display the Clock Adjust
screen.
The displayed time of the day blinks
when the clock has not been adjusted.
4. Adjust the time.
¢
5. Set the time.
After setting the correct time of the day, press the SET key.
CLOCK
/LIGHT
Adjust the clock before setting the timer.
ON/STANDBY
SET
Press the CLOCK/LIGHT key. The LCD display shows
the time for abut 5 seconds then returns to the previ-
ous display.