Table of Contents
Advertisement
4.2 How to clean Interacoustics Products
If the surface of the instrument or parts of it are contaminated, it can be cleaned using a soft cloth
moistened with a mild solution of water and dish washing cleaner or similar. The use of organic solvents
and aromatic oils must be avoided. Always disconnect the USB cable during the cleaning process, and be
careful that no fluid is entering the inside of the instrument or the accessories.
•
Before cleaning always switch off and disconnect from power
Use a soft cloth lightly dampened with cleaning solution to clean all exposed surfaces
•
•
Do not allow liquid to come in contact with the metal parts inside the earphones / headphones
Do not autoclave, sterilize or immerse the instrument or accessory in any fluid
•
Do not use hard or pointed objects to clean any part of the instrument or accessory
•
•
Do not let parts that have been in contact with fluids dry before cleaning
Rubber ear-tips or foam ear-tips are single use components
•
•
Ensure isopropyl alcohol does not come into contact with any screens on the instruments
Recommended cleaning and disinfection solutions:
Warm water with mild, nonabrasive cleaning solution (soap)
•
•
70% isopropyl alcohol
Procedure:
Clean the instrument by wiping outer case with a lint free cloth lightly dampened in cleaning
•
solution.
Clean cushions and patient hand switch and other parts with a lint free cloth lightly dampened in
•
cleaning solution.
Make sure not to get moisture in the speaker portion of the earphones and similar parts
•
Concerning Repair
Interacoustics is only considered to be responsible for the validity of the CE marking, effects on safety,
reliability and performance of the equipment if:
1. assembly operations, extensions, readjustments, modifications or repairs are carried out by
authorised persons,
2. a 1 year service interval is maintained
3. the electrical installation of the relevant room complies with the appropriate requirements, and
4. the equipment is used by authorised personnel in accordance with the documentation supplied by
Interacoustics.
The customer shall reach out to the local distributor to determine the service/repair possibilities including
onsite service/repair. It is important that the customer (through local distributor) fills out the RETURN
REPORT every time when the component/product is sent for service/repair to Interacoustics.
4.3 Warranty
INTERACOUSTICS warrants that:
The AS608 is free from defects in material and workmanship under normal use and service
•
for a period of 12 months from the date of delivery by Interacoustics to the first purchaser.
Accessories are free from defects in material and workmanship under normal use and service
•
for a period of ninety (90) days from the date of delivery by Interacoustics to the first purchaser.
D-0127810-A – 2020/05
AS608 - Instructions for Use - US
Page 22
Advertisement
Table of Contents
