Table of Contents
Advertisement
AS608e Special Functions:
Talk Forward: On the AS608e Talk Forward is activated by holding down the HL db (3) rotary wheel.
While holding down the Tone Switch button (3), the talk forward level can be adjusted.
The following F-key functionalities can be access by pressing the frequency rotary wheel (1):
F1: Delete all thresholds stored in the internal memory of the AS608e.
F2: Store a Not Heard threshold point.
F3: Display the L/R thresholds stored in the internal memory of the AS608e.
F4: Start the Hughson Westlake (HW) automatic test procedure. Please refer to the next chapter for
instructions about how to setup the HW test.
Display:
A)
Tone: A tone presentation indicator is provided in the top left corner of the display header.
B)
Response: When using the APS3 response button, a response is indicated in the middle of display
header.
C)
Power On or Battery status: The power status of the AS608/AS608e is indicated in the top right
corner of the display header.
The icon will change depending on whether the instrument is powered via an external source (power
supply or USB connection to computer) or batteries.
When powered by batteries, the battery icon will change depending on the battery power level. When
batteries are running low the display will read Low Battery and flash.
The Power Off settings of the instrument can be adjusted at different time intervals or set to never
power off – please see Setup section for details.
D-0127810-A – 2020/05
AS608 - Instructions for Use - US
Page 15
Advertisement
Table of Contents
