Brother TN-210 Series Remanufacturing Instructions page 8

DISASSEMBLING THE CARTRIDGE
STEP 2.12
Inspect the doctor blade cover. If wrinkled or damaged, remove
the blade cover from the doctor blade (Figure 2.12A).
STEP 2.13
Phillips
Screwdriver
Doctor Blade
Remove the three screws on top of the doctor blade (Figure 2.13).
Note: To clean the doctor blade, saturate a lint-free
cleaning cloth with 91-99% isopropyl alcohol,
gently clean the black material portion of the
doctor blade. Then clean with a lint-free cleaning
cloth saturated with de-ionized water, then blow
with dry, filtered, ionized compressed air.
Visit Static Control on the web @ www.scc-inc.com
®
Doctor Blade Cover
FIGURE 2.12A
Screws
FIGURE 2.13
Use a lint-free cleaning cloth dampened with 91-99% isopropyl
alcohol to clean any adhesive residue from the doctor blade's
metal stamping (Figure 2.12B).
STEP 2.14
Small Slotted
Screwdriver
Using a small slotted screwdriver, gently pry the doctor blade up
from the cartridge and remove the doctor blade (Figure 2.14).
STEP 2.15
Doctor Blade
Sealing Felts
Using a small slotted screwdriver, gently fluff the doctor blade
sealing felts so the fibers are standing (Figure 2.15).
SSS 1127
™
FIGURE 2.12B
FIGURE 2.14
Small Slotted
Screwdriver
FIGURE 2.15
1127 |
SSS
™
8