Brother TN-310BK Remanufacturing Instructions

Hl-4140cn; 4150cdn; 4570cdw; dcp-9050; 9055; 9270cdn; mfc-9460; 9465cdn; 9560; 9970; 9970cdw; hl-l8250; 8350cdw; 8350cdwt; 9200; dcp-l8400; mfc-l8600; 8650; 8850; 9550
Hide thumbs

Advertisement

Quick Links

Brother
HL-4140CN/4150CDN/4570CDW/4570CDW/
®
DCP-9050/9055/9270CDN
MFC-9460/9465CDN/9560/9970/9970CDW
Brother® HL-L8250/8350CDW/8350CDWT/9200, DCP-L8400
MFC-L8600/8650/8850/9550
Brother
TN-310BK/ TN-310C/ TN-310M/ TN-310Y/
®
TN-315BK/ TN-315C/ TN-315M/ TN-315Y and DR-310CL
TN-331BK/ TN-331C/ TN-331M/ TN-331Y/ TN-336BK/
TN-336C/ TN-336M/ TN-336Y
www.scc-inc.com
SSS
T
& s
................................ 2
W
......................................... 3
D
C
................. 5
a
.................... 9
r
.................... 12
D
D
u
i
......................... 15
a
D
u
................. 17
r
D
C
V.2.4 : 09-14
1143
............. 13
.............. 18
V.2 - 0FPO

Advertisement

loading

  Related Manuals for Brother TN-310BK

  Summary of Contents for Brother TN-310BK

  • Page 1: Table Of Contents

    Brother HL-4140CN/4150CDN/4570CDW/4570CDW/ ® DCP-9050/9055/9270CDN MFC-9460/9465CDN/9560/9970/9970CDW Brother® HL-L8250/8350CDW/8350CDWT/9200, DCP-L8400 MFC-L8600/8650/8850/9550 Brother TN-310BK/ TN-310C/ TN-310M/ TN-310Y/ ® TN-315BK/ TN-315C/ TN-315M/ TN-315Y and DR-310CL TN-331BK/ TN-331C/ TN-331M/ TN-331Y/ TN-336BK/ TN-336C/ TN-336M/ TN-336Y 1143 ™ & s ........ 2 ools upplies ......... 3 irelines ....
  • Page 2: Ools Upplies

    & s ools upplies • Phillips Screwdriver • Small Slotted Screwdriver • Dry, Filtered, Ionized, Compressed Air for Cleaning • Lint-Free Swab (LFSWAB) Phillips Screwdriver Small Slotted Screwdriver • Lint-Free Cleaning Cloth (LFCCLOTH) • Conductive Lubricant (CONCLUBE) • 91-99% Isopropyl Alcohol Dry, Filtered, •...
  • Page 3: Irelines

    irelines hl-4570 C roTher arTriDge ssembly ® Drive Side Contact Side Contact Side Contact Support Side Support Bearing Spring Bearing Developer Roller Developer Developer Roller Roller E-Clip Stabilizer Gear Doctor Blade Drive Side Sealing Felt Support Bearing Contact Side Doctor Blade End Plate Developer Roller Cartridge...
  • Page 4 irelines hl-4570 D roTher ssembly ® Contact Side Drum Bearings Drum Drum Retaining Springs Drum Drive Side Drum Drum Bearings Contact Side End Plate Drive Side End Plate Drum Unit © Static Control Components, Inc. All rights reserved worldwide. The stylized S, Static Control and Odyssey are registered trademarks of Static Control Components, Inc. All other brand or product names are trademarks or registered trademarks of their respective companies.
  • Page 5: Isassembling The Artridge

    isassembling The arTriDge Using a Phillips screwdriver, remove the screw on the contact side On the drive side end plate, remove the three screws as shown in end plate as shown in Figure 1. Figure 4. Contact Screws Side End Plate Screw Phillips Screwdriver...
  • Page 6 isassembling The arTriDge Place a slotted screwdriver into the opening directly in front of the 10. Blow with dry, filtered, ionized, compressed air (Figure 10). developer roller stabilizer. Gently press on the stabilizer to release (Figure 7a). Rotate the developer roller stabilizer out and down as Air Gun shown in Figure 7b.
  • Page 7 isassembling The arTriDge 14. Lift to remove the doctor blade from the cartridge (Figure 14). 12. Remove the two screws securing the doctor blade as shown in Figure 12a. Doctor Blade Doctor Blade Figure 14 Cartridge Screw Figure 12a Note: Use dry, filtered, ionized, compressed air to loosen any excess toner or additive.
  • Page 8 isassembling The arTriDge 17. Using a small slotted screwdriver, gently fluff both of the doctor blade 19. Clean the hopper with dry, filtered, ionized, compressed air felts to loosen any toner build up Figure 17. (Figure 19). Slotted Air Gun Toner Hopper Screwdriver Doctor...
  • Page 9: Ssembling The C Artridge

    ssembling The arTriDge Install the two screws to secure the doctor blade into the cartridge Reinstall doctor blade. Place the doctor blade into the cartridge (Figures 23a and 23b. (Figure 22a) and ensure blade is seated by gently pressing downward (Figures 22b and 22c). Press blade back against cartridge to lock blade tabs securely into cartridge as shown in Figure 22d.
  • Page 10 ssembling The arTriDge Install the contact side end plate onto the cartridge (Figure 26a). Flag Gear Install the developer roller spring and support bearing onto developer Spring roller (Figure 26b). Using a Phillips screwdriver, secure end plate with a screw (Figure 26c). Contact Side End Plate Figure 27b...
  • Page 11 ssembling The arTriDge Reinstall hopper cap (Figure 30). Hopper Cap Figure 31 Note: Replace the OEM hopper cap with a replacement if the OEM hopper cap is damaged. 1143 ™ page...
  • Page 12: Esetting The F Lag G Ear

    eseTTing The Put the long arm of the spring over the flag gear and the short arm Note: Reference the flag gear photos in Figure 32 to of the spring under the cartridge tab as shown in Figure 34a. Final determine if you have a low yield, high yield or extra assembly is shown in Figures 34a and 34b.
  • Page 13: Isassembling The Rum Nit

    isassembling The Note: Notice the Replace Drum message on the printers display screen. Using a Phillips screwdriver remove the five screws from contact and Using a small slotted screwdriver remove the white drum bearings on drive sides end plates of the drum unit (Figures 35a and 35b). the drive side of the drum unit and set aside (Figures 37a and 37b).
  • Page 14 isassembling The Using a small slotted screwdriver, pry the two locking tabs holding the Lift the drum out of the drum unit, contact side first (Figure 41). contact bearing and push the drum towards the drive side of the drum unit (Figures 39a and 39b).
  • Page 15: Nstalling The D Rums

    nsTalling The nsTalling The rums rums Note: The following steps should be completed for each drum before the drum unit is assembled. 10. Using a lint-free swab, apply conductive lubricant to the end of 12. Rotate the drum contact bearing until the larger locking tab is the contact side drum bearings and install each bearing onto the positioned at the top and set the contact side of the drum into the replacement drums (Figures 43a and 43b).
  • Page 16 nsTalling The 13. Push the drum from the drive side until the contact bearing locks into 15. Apply cartridge lubricant using a lint-free swab, then install the white place (Figure 46). drive side drum bearings (Figures 48a and 48b). Push The Drum Drive Side Drum Bearing Lint-Free Swab...
  • Page 17: Ssembling The Rum Nit

    ssembling The Rotate the drum unit so the replacement drums are facing down as Rotate the end plates up and secure each end plate with 5 screws shown in Figures 49a and 49b. (Figures 51a, 51b and 51c). Drum Unit Drive Side End Plate Figure 49a...
  • Page 18: Esetting The Rum Ounter

    eseTTing The ounTer Note: When replacing the drum unit with a new drum unit, reset the drum counter by completing one of the following options: OPTION 1 Press to navigate to Machine Info. Press OK. Press to navigate to Reset Parts Life. Press OK. Press to navigate Drum Unit.
  • Page 19 DEDICATION TO TRAINING In order to produce consistent high quality prints that are virtually indistinguishable from the OEM, it is essential to follow Static Control’s remanufacturing instructions exactly as directed. Static Control is dedicated to informing customers of the latest innovations in training and knowledge. Access to these instructions, our technical support staff and View on Demand Webinars is available to all customers in good standing.