Meech Hyperion 924IPS Operating Manual page 11

When installed at short range over a web or sheet, the bars must be positioned away
from surfaces and rollers, as shown in the following diagrams.
Your Meech distributor will be able to assist with questions regarding positioning of
your equipment.
Electrical Installation
WARNING
The 924IPS requires a grounded 24V DC supply. The 0V line must be connected to
ground. Failure to do so, will result in damage to the bar or the 24V supply.
Power Supply
220V AC
Grounded 0V
24V DC
0V
924IPS
9