Cisco Webex DX70 Administrator's Manual page 52

Cisco Webex DX70 and DX80

Introduction Introduction
How to administer the video conferencing device (page 4 of 4)
Settings and device information on the user interface
You have access to device information, and some basic
configurations and device tests on the device's user interface.
Device-critical settings and functions, such as network settings,
service activation, and factory reset, may be protected by a
► Restrict the access to the Settings
passphrase, refer to the
menu chapter.
Some of the settings and tests are also part of the Setup assistant
that is launched when the device is powered up for the first time.
The Setup assistant is described in the Getting Started Guide for
devices running CE software.
D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
Configuration Peripherals
Access Settings
1. Select the device name or address at the top of the user
interface.
2. Select Settings.
A padlock symbol
(locked down).
3. Select the setting you want to change, or the test you want to
run.
If a setting is locked down, an authentication window pops up,
and you have to sign in with ADMIN credentials to proceed.
Maintenance
indicates that a setting is protected
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
52
Administrator Guide
Device settings Appendices