Network [N] Trafficcontrol Mode; Network [N] Vlan Voice Mode; Network [N] Vlan Voice Vlanid - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

Network [n] TrafficControl Mode

n: 1..1
Define the network traffic control mode to decide how to control the video packets
transmission speed.
Requires user role: ADMIN, USER
Default value: On
Value space: Off/On
Off: Transmit video packets at link speed.
On: Transmit video packets at maximum 20 Mbps. Can be used to smooth out bursts in
the outgoing network traffic.

Network [n] VLAN Voice Mode

n: 1..1
Define the VLAN voice mode. The VLAN Voice Mode will be set to Auto automatically if you
have Cisco UCM (Cisco Unified Communications Manager) as provisioning infrastructure.
Note that Auto mode will NOT work if the NetworkServices CDP Mode setting is Off.
Requires user role: ADMIN, USER
Default value: Auto
Value space: Auto/Manual/Off
Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If
CDP is not available, VLAN is not enabled.
Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If
CDP is available, the manually set value will be overruled by the value assigned by CDP.
Off: VLAN is not enabled.
D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
Configuration Peripherals Maintenance

Network [n] VLAN Voice VlanId

n: 1..1
Define the VLAN voice ID. This setting will only take effect if Network VLAN Voice Mode is
set to Manual.
Requires user role: ADMIN, USER
Default value: 1
Value space: Integer (1..4094)
Set the VLAN voice ID.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
138
Administrator Guide
Device settings Device settings Appendices