Cisco Webex DX70 Administrator's Manual page 21

Cisco Webex DX70 and DX80 Administrator Guide

Introduction Introduction Configuration Peripherals Maintenance Device settings Appendices
Automatic factory reset when changing the call
service - device activation
(All products)
The device will automatically factory reset and restart
when using the user interface to change the device
activation method, for example from VCS to Cisco
UCM. This will prevent conflicting configurations when
provisioning the device to a new service.
Changing the provisioning from the API will not
automatically factory reset the device.
Support for separate RTP port ranges for audio
and other media
(All products)
You can configure the device so that audio uses a
different RTP port range than other media. The two
ranges cannot overlap. As default, all media use the same
RTP port range.
D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020. www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
21