Serialport Settings; Serialport Loginrequired; Serialport Mode - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

SerialPort settings

SerialPort Mode

Enable/disable the serial port.
Requires user role: ADMIN, INTEGRATOR
Default value: On
Value space: Off/On
Off: Serial communication is disabled.
On: Serial communication is enabled.

SerialPort LoginRequired

Define if login shall be required when connecting to a serial port.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The user can access the device via the serial port without any login.
On: Login is required when connecting to the device via the serial port.
D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
161
Administrator Guide
Device settings Device settings Appendices