Cisco Webex DX70 Administrator's Manual page 63

Cisco Webex DX70 and DX80

Introduction
Manage the lists of trusted certificate authorities - CAs (page 3 of 4)
Manage pre-installed CA certificates for CUCM via Expressway provisioning
Sign in to the web interface, navigate to
Authorities, and open the Collaboration Edge
View or disable certificates
Use the Details... and Disable
buttons respectively, to view or
disable certificates.
D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
Configuration Configuration
Security > Certificate
tab.
The certificates and certificate issuers in the illustration are examples. Your device has other certificates.
As an alternative to using the pre-installed certificates,
you can append the certificates you need to the custom
certificate list manually.
Refer to the ► Upload a CA certificate to the device
chapter how to update the list of trusted CA certificates.
Peripherals Maintenance
63
Administrator Guide
Device settings
Pre-installed CA certificates
for CUCM via Expressway
The pre-installed CA certificates
in this list are only used when the
device is provisioned by Cisco Unified
Communications Manager (CUCM) via
Expressway (Edge).
Only Cisco Expressway infrastructure
certificates are checked against this list.
If the validation of the Cisco Expressway
infrastructure certificate fails, the device
will not be provisioned and registered.
Factory resetting the device does not
delete the list of pre-installed certificates.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Appendices