Roomreset Settings; Roomreset Control - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

RoomReset settings

RoomReset Control

This setting is for use with control systems or macros. Macros allow you to write snippets of
JavaScript code that can automate parts of your video conferencing device, thus creating
custom behavior.
When a room has been idle for some time the video conferencing device can send an event
to indicate that the room is ready to be reset.
The events that are sent when this setting is enabled are:
*e RoomReset SecondsToReset: 30
** end
*e RoomReset Reset
** end
Requires user role: ADMIN
Default value: On
Value space: CameraPositionsOnly/Off/On
CameraPositionsOnly: Not applicable.
Off: No RoomReset events will be sent.
On: The room reset control is enabled and RoomReset events will be sent.
D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
156
Administrator Guide
Device settings Device settings Appendices