Link An On-Premises Registered Device To Cisco Webex Edge For Devices - Cisco Webex DX70 Administrator's Manual

Cisco Webex DX70 and DX80

Introduction

Link an on-premises registered device to Cisco Webex Edge for Devices

You can use Webex Edge for Devices to link your on-premises
registered devices to the Webex cloud service. This gives you
access to select cloud features, while your registration, device
configuration management, calling, and media services remain
on-premises. You can manage the cloud services and get device
diagnostics in Webex Control Hub.
Set-up
We recommend that you register the device to the on-premises
service first; then you link it to the Webex Edge. For information
how to link a device to Webex Edge for Devices, read the
► Webex Edge for Devices
article on Webex Help Center.
Features
Webex Edge for Devices has the following features and
functionality:
• Online/Offline connection status in Control Hub
• Device diagnostics with the ability to set administrator alerts
• Device historical analytics available directly in Control Hub
• Access to device settings in Control Hub (Advanced
Configurations)
• Cloud xAPI access
• Hybrid calendar through Control Hub
• Webex Assistant (voice-driven virtual assistant)
The Webex Edge for Devices article referenced above has an
updated list of all available features and limitations.
Prerequisites
• Software version CE9.10 or later
• CUCM version 12.5su1, or 11.5.x with the latest device pack
• Control Hub administrator access
• Device Connector tool (to set up the link to Webex Egde)
• A cloud services license (Cisco Collaboration Flex Plan)
D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
Configuration Peripherals Maintenance
LAN (on-premises)
CUCM/VCS
Registration, call control,
device configuration and
management
Video
device
Webex cloud
Control
Hub
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
213
Administrator Guide
Device settings Appendices Appendices
Cloud
services