Related Manuals for Cambo AC-371
Summary of Contents for Cambo AC-371
- Page 1 AC-371 Rear Base Tilt For Actus-B, -G and DB INSTRUCTION MANUAL Please read this manual carefully before using the AC-371! Version 1.00...
- Page 2 Thank you for purchasing a Cambo product The AC-371 rear base tilt kit is an additional kit to the Actus-B, Actus-G or Actus-DB. This kit allows the rear standard to tilt +15º / -15º with fixed increments of 5º. The AC-371 also extends the telescopic rail system with 42mm extra travel.
- Page 3 Removing the rear standard Figure 2. Removing the rear standard. To remove the rear standard [4] from the Actus, simply slide the rear standard over the front end of the rail.
- Page 4 Reassembling the rear standard Figure 3. Installing the rear tilt unit. Start by installing the rear base tilt unit [7] to the Actus rail. Remove the M2x4 [5] from the rear base tilt unit by using the supplied 1,5mm Allen key [6]. Slide the rear base tilt unit over the rail until the rear base tilt unit reaches the end stop.
- Page 5 Reassembling the front standard Figure 4. Installing the spacers.(Left, Actus-B, Right, Actus-G and Actus-DB) For the Actus-B place the 21,5mm spacer [8] below the front standard and fix both to the Actus rail at the same time using the supplied M3x35 ISO14581 Torx screws [9] using the Torx T10 key [3].
- Page 6 Adjusting the telescopic system Figure 5. Adjusting the telescopic system. To avoid play or stalling of the telescopic system after installing the rear base tilt unit, both sliding parts can be readjusted. To remove play from the system set screws [11] should be tightened using Allen key [6]. To avoid stalling, loosen the set screws [11].
- Page 7 Actus with AC-371 added features Figure 6. AC-371 rear base tilt unit. Now the AC-371 rear base tilt kit is assembled you have added a 21,5mm spacer [8] to the front standard to keep the optical axis of the lens board aligned to the centre of the sensor.
- Page 8 This instruction manual is prepared with care, although no responsibility, financial or otherwise, is accepted for any consequences related the information stated in this instruction manual. All specifications in this instruction manual are subject to change without notice. For more information please visit the Cambo web site: www.cambo.com...